KMC Corporate Headquarters
KMC Corporate Headquarters
1221 South Park Street
P.O. Box 348
Port Washington, WI 53074-0348
Phone Number: 262-377-5030
Fax Number: 262-284-9774
E-mail: sales@kmcstampings.com
Print Back
Flared edges around clamping loop help prevent wire or tube abrasion. Furnished open to allow the clip to be snapped over wiring or tube, then closed with bolt at assembly. Contoured to minimize distortion during clamping. Vinyl coated for additional cushion protection against vibration, cutting and slipping.
Unit of Measure

Specifications

Clamping Diameter (D1)
±.031

N/A 0.812 "

Hole Diameter (H)
±.005

N/A 0.281 "

Width (W)
±.010

N/A 0.500 "

Hole Center To End (E)
±.015

N/A 0.250 "

Slot Center To End (F)
±.015

N/A 0.296 "

Slot Length (S)
±.020

N/A 0.375 "

Material

 N/A Steel - ASTM A1008 CS Type B

Cushion

 N/A Black Vinyl per ASTM D2287

Center To Center (L)
±.031

N/A 0.812 "

Available Finishes

 N/A CFV1409Z1 - G90 Per ASTM A653/A653M CFV1409Z2 - .0002 min Zinc clear

RoHS 3 Compliant

 N/A
 

REACH Compliant

 N/A
 

Features

Features

 N/A Closed Type Furnished Open Light Duty

Warning

N/A

warning

California Proposition 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.