CLICK HERE TO VISIT OTHER KMC DIVISIONS
KMC Custom Parts
Join Our Team

Our online, searchable catalog is the easiest way to find the parts you need. There are a couple ways to search:

  • Browse “By Keyword”
  • Click the down arrow and choose “By KMC Part #” and enter the number to the right
  • Use the Tab below to search by specification
  • Or, fill out a form to request information
KMC's most popular clamp for holding wiring and tubes. Furnished open to allow the clamp to be snapped over the wiring or tube, then closed with bolt at assembly.
Vinyl coated for additional cushion protection against vibration, cutting and slipping.
Unit of Measure

Specifications

Clamping Diameter(D1)

N/A 0.312 "

Hole Diameter (H)
±.005

N/A 0.531 "

Width (W)
±.010

N/A 0.875 "

Hole Center To End (E)
±.015

N/A 0.562 "

Slot Length (S)
±.020

N/A 0.625 "

Material

N/A Steel - ASTM A1008 CS Type B

Cushion

N/A Black Vinyl per ASTM D2287

Center To Center (L)
±.031

N/A 0.812 "

Gap (F)
±.031

N/A 0.031 "

Material Thickness (T)

N/A 0.032 "

Note

N/A Parts Have One Round and One Slotted Hole

Available Finishes

N/A COV0617Z1 - G90 Per ASTM A653/A653M COV0617Z2 - .0002 min Zinc clear

RoHS 3 Compliant

N/A
 

REACH Compliant

N/A
 

Features

Features

N/A Closed Type Furnished Open

Warning

N/A

warning

California Proposition 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.