KMC Part # CFV-1709, Series CFV Light Duty Clamps On KMC

Our online, searchable catalog is the easiest way to find the parts you need. There are a couple ways to search:

Browse “By Keyword”
Click the down arrow and choose “By KMC Part #” and enter the number to the right
Use the Tab below to search by specification
Or, fill out a form to request information

Request Information

Flared edges around clamping loop help prevent wire or tube abrasion. Furnished open to allow the clip to be snapped over wiring or tube, then closed with bolt at assembly. Contoured to minimize distortion during clamping. Vinyl coated for additional cushion protection against vibration, cutting and slipping.

Unit of Measure

Specifications | Features | Warning

Specifications

Clamping Diameter (D1) ±.031	N/A 1.000 "
Hole Diameter (H) ±.005	N/A 0.281 "
Width (W) ±.010	N/A 0.500 "
Hole Center To End (E) ±.015	N/A 0.250 "
Slot Center To End (F) ±.015	N/A 0.296 "
Slot Length (S) ±.020	N/A 0.375 "
Material	N/A Steel - ASTM A1008 CS Type B
Cushion	N/A Black Vinyl per ASTM D2287
Center To Center (L) ±.031	N/A 0.906 "
Available Finishes	N/A CFV1709Z1 - G90 Per ASTM A653/A653M CFV1709Z2 - .0002 min Zinc clear
RoHS 3 Compliant	N/A
REACH Compliant	N/A

Features

N/A Closed Type Furnished Open Light Duty

Warning

N/A

California Proposition 65 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.